
A milligram figure on an herbal supplement label does not always describe the same thing from one product to another.
It may refer to the weight of a finished extract, the amount of starting herb represented by that extract, a specified marker compound, or a preparation that also includes a carrier. That means two products can display very different milligram figures without those numbers being directly comparable.
A desk audit prepared for HerbEra examined public labels and product pages for 40 herbal supplements selected from iHerb, with 10 products each in ashwagandha, turmeric, milk thistle and elderberry. The review recorded what the available information said about each botanical preparation and its amount per serving. HerbEra products were excluded.
For 39 of the 40 products, the checked sources provided a clear amount per serving for the botanical preparation, a stated herb equivalent, or a named preparation that included a carrier. The remaining product had conflicting quantity descriptions across sources.
The important distinction was what those amounts described.

The same unit can describe different parts of a preparation
Two milk thistle products from the sample show the problem clearly.
One listed 250 mg of a 4:1 milk thistle extract per capsule, equivalent to 1,000 mg of starting herb.
Another listed 300 mg of extract standardized to 240 mg of silymarin flavonoids, or 80%.
In the first product, the 1,000 mg figure referred to the botanical material represented by the extract. It did not describe the weight of extract in the capsule.
In the second, the 240 mg figure described a specified group of compounds within the 300 mg extract. It was part of that preparation, not an additional amount to be added to it.
The contrast becomes clearer when the label details are placed side by side.
|
Label element |
Product A |
Product B |
|
Serving size |
1 capsule |
1 capsule |
|
Extract weight |
250 mg milk thistle extract |
300 mg milk thistle extract |
|
Declared herb equivalent |
Equivalent to 1,000 mg milk thistle |
Not stated |
|
Extract ratio |
4:1 |
Not stated |
|
Silymarin amount or percentage |
Not stated |
240 mg silymarin flavonoids (80%) |
|
What the source does not provide |
No stated silymarin amount or percentage |
No stated herb equivalent or extract ratio |
Placed side by side, the two products show why milligram figures should not be compared in isolation. In the first product, the larger 1,000 mg figure refers to the amount of starting herb represented by the extract. In the second, the 300 mg figure refers to the extract itself, while the 240 mg figure describes a specified portion of that extract.
The figures answer different questions. An extraction ratio helps describe the relationship between starting botanical material and the finished extract. A marker amount or percentage describes something about the composition of the finished preparation.
Neither figure, on its own, establishes which product is more effective. That would require evidence about the specific preparation, dose and intended use.
More detail can mean different kinds of detail
Across the 40 products, 25 provided at least one confirmed numerical detail beyond the basic finished-ingredient weight. That could be an extraction ratio or herb-equivalent amount, or the amount or percentage of a named marker compound.
This was a count of confirmed disclosures, not a quality score. Some remaining cases were unresolved, and the measure was not a test that every preparation needed to pass.
Different botanical forms also call for different kinds of information.
A whole-herb powder has no extraction ratio because it has not been extracted. A standardized extract may provide useful information about a marker compound without giving a botanical-equivalent figure.
That makes simple comparisons difficult. More numbers do not automatically mean a better product, and fewer numbers do not automatically mean a worse one.
Some formulations add another layer. Botanical extracts may be supplied as preparations that include carriers such as phospholipids. In those cases, the stated weight can apply to the preparation as a whole rather than to botanical extract alone.
The ingredient description is therefore as important as the number beside it.
How to read the numbers more carefully
For consumers, the Supplement Facts panel offers a practical place to start.
First, check the serving size. A quantity listed for one capsule should not be compared directly with a quantity listed for two gummies, two capsules or a measured liquid serving.
Then read the full ingredient entry rather than jumping to the milligram figure.
Look for the plant species, the plant part and the form of the ingredient. Is it whole-herb powder, an extract, a concentrate or another type of preparation?
If several figures appear in the same entry, they may describe the same ingredient in different ways. An extract weight, a starting-herb equivalent and a marker percentage can all belong to one preparation.
Products that combine more than one form of the same botanical deserve another look as well. If a formula contains both powder and extract, check whether separate quantities are given for each.
Blends introduce a different issue. If several herbs appear under one total blend weight, that figure does not necessarily reveal how much of each individual herb is present. A mixed formula therefore cannot always be compared directly with a single-herb product using the total milligram number alone.

What Experts Look for Beyond the Milligrams
The label can tell consumers a lot, but several botanical experts I spoke with cautioned that it may still leave important questions unanswered.
Roy Upton, President of the American Herbal Pharmacopoeia, pointed to a fundamental limitation:
“Unfortunately, most often there is too little information in product labeling to allow for a meaningful comparison between two similar products. Products can be vastly different in quality and composition even if labeled exactly the same.”
Upton said details such as whether the botanical is fresh or dried, organically grown or wildcrafted, and the herb-to-extract ratio can all matter when comparing products. Plant part can also change what the consumer is actually buying. Ashwagandha root and leaf, for example, or mushroom fruiting body and mycelium biomass, are not interchangeable simply because the same common ingredient name appears on the front of the bottle.
Asa Waldstein, a dietary supplement regulatory consultant with more than two decades of industry experience, made a similar point about preparation:
“I first look at the form of the herb and the plant part used. For example, 500 mg of root powder is not automatically comparable to 500 mg of an extract from that same herb. The herb name and milligrams only tell part of the story, which is why clear labeling matters.”
Steven Dentali, PhD, of Dentali Botanical Sciences, takes the comparison one step further. He noted that labels can help consumers compare basic specifications such as plant identity, whether the ingredient is a powder or extract, and certain marker constituents. But even those details do not necessarily establish that two botanical products are equivalent in a meaningful sense.
As Dentali put it:
“Product labels can help compare basic specifications such as plant identity, whether the ingredient is a powder or extract, and certain marker constituents. But that still doesn’t establish that two botanical products are phytoequivalent. To make that judgment, you would need a much fuller picture of the plant material and how it was preserved, processed and extracted.”
Taken together, the three perspectives point to the same underlying problem: the herb name and the number beside it are useful starting points, but they are rarely the whole comparison.
Quick questions about herbal supplement labels
What does a 4:1 extract mean?
A 4:1 extract ratio describes the relationship between the starting botanical material and the finished extract. In simple terms, four parts of starting herb are represented by one part of extract.
It does not mean that a capsule containing 250 mg of a 4:1 extract physically contains 1,000 mg of extract.
Is herb equivalent the same as extract weight?
No.
Extract weight refers to the amount of finished extract in the serving. Herb equivalent refers to the amount of starting botanical material that the extract represents.
That is why a label can list 250 mg of extract alongside an equivalent of 1,000 mg of starting herb without the two figures contradicting each other.
Does standardization prove effectiveness?
No.
Standardization means that a preparation is made to contain a specified amount or percentage of a particular compound or group of compounds.
It can provide useful information about the consistency and composition of an extract, but it does not by itself establish that the product is effective, superior or appropriate for a particular use.
Is a higher milligram number always better?
No.
A larger number may refer to a different type of measurement, such as starting-herb equivalent rather than finished extract weight. Even when two products report the same kind of measurement, the number alone does not establish quality or effectiveness.
Why can two products using the same herb look so different on the label?
Because they may use different botanical forms or describe them differently.
One product may contain whole-herb powder, another an extract, and another a standardized or carrier-containing preparation. Each can require different information to explain what the serving actually contains.
What the review can and cannot show
The audit reviewed publicly available online information on September 29, 2026.
Products were selected from iHerb using fixed category quotas and retailer-displayed purchase-volume bands. Those bands should not be interpreted as U.S.-only sales data, and a sample of 40 products from one retailer cannot represent the entire herbal supplement market.
The project was also not a consumer comprehension study. No shoppers were asked to interpret the labels, so the review cannot establish how easy or difficult these distinctions are for the average buyer to understand.
It did not test product contents, assess manufacturing quality or compare safety or effectiveness.
Its finding is narrower: quantities expressed in the same unit can refer to different aspects of a botanical preparation.
When two products display different amounts of the same herb, first establish what each figure measures. An extract weight, a starting-herb equivalent and a marker amount describe different aspects of a preparation.
Only then can the comparison begin.
Methodology
This analysis reviewed 40 herbal supplement products across four botanical categories, with 10 products selected from each category using iHerb’s first-page Featured listings as displayed on September 29, 2026. iHerb was used solely as a consistent retail source for sample selection and was not involved in the research. Selection also considered displayed purchase-volume bands, with a maximum of two formulations from the same brand within each category.
The analysis examined publicly available product information, including iHerb listings, Supplement Facts panels, product labels and official manufacturer pages where additional verification was needed. Products were evaluated for information relevant to comparison, including amount per serving, plant part, preparation type, extract ratios or herb-equivalent amounts where provided, and standardization information.
Sources and Supporting Material
The 40-product sample was selected from iHerb listings as they appeared on September 29, 2026. Product information was checked against publicly available labels, retailer records and official manufacturer pages where appropriate.
Specific examples discussed in the article were additionally verified using the relevant manufacturer or retailer pages. Background information on botanical standardization and marker compounds was referenced from the National Institutes of Health Office of Dietary Supplements.
A detailed research dataset and methodology record were retained for the analysis.